Home » FAQs
General Info
Short answer? A place to make stuff!
Long answer? Think of CCM like a gym for your creative muscles. We're a place that provides easy access equipment and tools you might not have at home. Maybe those tools are too expensive, too large, or have specific power or ventilation requirements that you just can't fit in your garage, your studio, or at your house.
It’s our job to provide equipment, access and training to everything from saws, soldering irons, and sewing machines to 3D printers and laser cutters. It’s your job to make whatever you want!
We’re a membership‑based community workshop open to makers of all skill levels. Members get 24/7 access to tools, training and storage, while non‑members can drop by for classes and events during staffed hours.
You can learn more by browsing our How It Works page.
CCM is located at the corner of 44th and Field in Wheat Ridge, Colorado -- only about 15 minutes from downtown Denver! We're the bright, colorful building at 9110 W. 44th Avenue, Wheat Ridge, CO 80033
More information, including parking and accessibility, can be found on our Hours & Location page.
CCM is open 24/7 for active members, but otherwise open for drop-in questions and visits during our staffed hours: Monday to Thursday, 9:00 AM to 5:00 PM.
More information, including holiday closures, can be found on our Hours & Location page.
Print your cat Mr. Mittens’ face on a coffee mug. Weld a tasteful metal dinosaur sculpture for your front yard. Engrave some wine glasses for your fun aunt Mabel. Craft that kitchen table you've been dreaming about! No matter your interests, there's very little you cannot make with all that CCM offers.
If you’re not sure where to start, we recommend perusing our project-based class offerings on our full calendar of events and classes to get your creative juices flowing.
Nope! There are no residency requirements for CCM members. All creative folks (whether from Steamboat, Spain, or Saturn) are welcome!
Membership & Costs
Yes. Only members may use tools unsupervised. Can non‑members attend classes? Absolutely! The difference here is that during class, students are accompanied by an instructor who is actively making sure nothing catches fire, tools are being used responsibly, and that everyone leaves with the same number of fingers and toes that they started with.
Policies like this one exist to ensure that equipment is used safely, responsibly, and only by those that have gone through the proper safety orientation and equipment-specific trainings. It's our primary goal to keep our community (including you) safe.
Anyone age 14 and up is eligible for CCM membership. Simply sign up for a membership and then swing by to grab your member ID card during our staff hours.
Note: membership does not automatically unlock your access to tools. Before you are allowed to use tools on your own, you'll need to attend CCM's safety orientation and then either complete equipment training classes or pass tool tests for the equipment you wish to use.
Likewise, some tools are still off-limits to younger makers, even those eligible for membership. You can read more about equipment policies for minors in our handbook, or later in this FAQ under Policies & Safety.
Want more details on how to access equipment? Learn more by visiting our How it Works page.
Membership costs vary, but never exceed $60 per month.
- Standard membership is $60 per month ($540 per year).
- Discounted membership is $30 per month ($270 per year), and is available for students, educators, seniors over 65, and veterans.
- A single‑day pass costs $20 and is only valid during staffed hours.
- Sliding‑scale, volunteer‑for‑membership and sponsored memberships are available if cost is a barrier
- Single-use free monthly passes are also available thanks to local partnerships with groups such as the Jefferson County Public Library.
All membership tiers, regardless of cost, receive the same CCM benefits.
CCM membership comes with tons of exciting perks designed to support your CCM experience and connect you with a network of like-minded makers. All membership tiers, regardless of cost, receive the same CCM benefits, which include:
- 24/7 access to the makerspace
- 24/7 access to approved equipment and tools
- 24/7 access to our kitchen and lounge
- Free reservable conference room, coworking space, and learning lab rooms
- Free weekly storage space, as well as paid monthly storage space or lockers
- 20% discount on CCM special events
- Invitations to exclusive members-only special events
- Eligibility for exclusive members-only, all-expenses-paid Denver Metro grants, classes, small business bootcamps, entrepreneurship workshops, and pitch events.
- Free booths at regional farmer's markets to sell your products
- Free monthly "Brain Food" from participating restaurants and businesses
- Free guest and visitor passes*
- Access to the in-house CCM Marketplace to sell products and services
- Access to the CCM voting board
- Discounted materials and supplies at partnering businesses.
*visitors and guests may not operate or handle equipment or tools.
You can start, stop, or renew membership anytime through your CCM Portal.
Scroll down to see your current membership status and options to join, renew, or cancel. Under the “Help” tab in the portal, you’ll also find a direct link to Manage Membership.
Our goal is to make membership feel accessible and worthwhile, but we understand that sometimes plans change.
Annual memberships
When you sign up for an annual membership, you’re committing to a 12-month term in exchange for a significant discount (about 25% off, or roughly three months free). That said, if your experience doesn’t quite meet expectations, you may be eligible for a refund if requested within 30 days of signing up.
Monthly memberships
We don’t typically offer refunds on monthly memberships, since they’re designed for short-term use. That said, if it’s your first month and something truly didn’t meet your expectations, reach out within 7 days of joining and we’d be happy to talk it through.
So if you decide the makerspace isn’t the best fit, just contact our team within the appropriate window and we’ll help you out.
Note: Refunds apply only to new annual memberships (or first-month exceptions), not renewals. If you don’t plan to continue, please be sure to toggle off auto-renew before your next billing date! You’ll still have access through the end of your current term.
We definitely understand that unexpected circumstances can affect your creative journey. While we don't offer the option to pause annual memberships or grant free extensions, we’re here to help you make the most of the makerspace.
The good news is that you’ve got full control over your plan and can always cancel or rejoin as needed through your CCM Portal. Just scroll down to see your current membership status and options to cancel, renew, or rejoin. Under the “Help” tab in the portal, you’ll also find a direct link to Manage Membership.
If your needs change or a different plan would work better, we’re always happy to help you sort through your options.
You must be at least 14 years old to become a CCM member.
Note: minors (14–17) must still be accompanied by a parent or guardian, regardless of membership status. Likewise, some tools are still off-limits to younger makers, even those eligible for membership. Some classes permit younger children with parent supervision, but children cannot use high‑risk equipment.
You can read more about equipment policies for minors in our handbook, or later in this FAQ under Policies & Safety.
Yes! Students, educators, seniors over 65, and veterans qualify for our $30/month ($270/year) discounted plan. CCM also offers sliding‑scale memberships and volunteer‑for‑membership options.
For those looking to save even more, all of our annual membership options offer three months for free! Only pay for nine months, and enjoy full membership for the entire year.
Similarly, single-use free monthly passes are also available thanks to local partnerships with groups such as the Jefferson County Public Library.
Yes!
- Membership benefits include eligibility for grants, small‑business bootcamps and entrepreneurship workshops through participation in professional development classes hosted by Growing U and the MatrixOwl program. Grants may range from $100 to $10,000.
- Scholarships are available by contacting our main office. Scholarships may be limited by current availability and donor requirements. Please email info@clearcreekmakerspace.com to learn more.
- CCM also hosts an artist‑in‑residence program each quarter, where a local artist shares their skills, leads workshops, and creates exciting original work using CCM tools in exchange for three months of free membership.
Yes. Purchase a day pass, complete safety orientation and any required training ahead of time, then work on your project during staffed hours.
A single day pass costs $20 and is intended for one‑time projects or for those who just need temporary access to the space. Importantly, day‑pass users must still attend safety orientation and equipment training before using tools, and the pass is only valid during staffed hours.
Your pass is eligible for 30 days from time of purchase, so please plan ahead! You cannot show up day-of to use tools without proper training.
Access & Training
Three simple steps:
- Sign up for membership
- Attend and complete training
- Reserve equipment!
Step 1: Sign Up for Membership
During the membership process, you should:
- Sign up online for the membership tier that works best for you,
- Sign the safety waiver,
- Set up your free CCM portal
Step 2: Attend Training
All members, regardless of their experience, must attend a 60‑minute in‑person safety orientation. After that, it depends whether or not you have prior experience using the tools you want to use:
- If you've never used the tools, you should complete an equipment‑specific training workshop
- If you have prior experience, you can skip the line and schedule a tool test. Read more about tool tests lower in this same section of the FAQ.
After either option, you'll receive a link to take a quiz. Pass the quiz, and your CCM portal will unlock equipment reservation.
Step 3: Reserve Equipment!
Once you've passed the quiz, you can reserve the equipment you've been approved to use anytime! That means 24/7 access, 365 days a year!
You can read more on our How it Works page.
Yes. Safety training is a mandatory before using equipment on your own. It's a one‑hour safety orientation that covers shop rules, PPE requirements, emergency procedures and general expectations in the makerspace.
You don't have to be a member to take safety orientation, so if you're thinking about membership but want to plan ahead and get all training out of the way first, feel free to reserve a spot!
Yes. Everyone must sign our safety waiver before taking classes or using the space. This includes members, non-members, guests, visitors, and all class attendees.
If you're a human and/or basketball-playing dog, you must sign the waiver in order to use the makerspace.
We usually offer safety orientation at least once a week on a rotating weekday evening schedule. You can find upcoming safety training workshops listed on the calendar of our Events & Classes page.
Alternatively, simply head to our Eventbrite safety training page to filter out other classes and see all upcoming safety classes in one spot.
Usually a day or two after enrolling! We try to print badges at the start of each week, and we'll email you when your badge is printed.
That said, please plan ahead if you have tight deadlines:
- If you sign up over the weekend, we typically have new badges printed by Monday afternoon or Tuesday morning.
- If you sign up and wish to stop by same-day to pick up your badge, please notify us! We may not have it printed depending on our small team's busy schedule. Our staff often teaches and leads events, so we may be away from our desks helping members.
- If you sign up at 4:59 PM on a Thursday, unfortunately our staff won't have your badge printed until the next Monday. The makerspace is staffed from 9:00 AM to 5:00 PM, Monday to Thursday.
The CCM Portal is the makerspace's online learning and equipment reservation platform. It's a single-stop dashboard where you can manage your membership, find key resources, get help, and browse our monthly news updates. It's also the spot where you reserve equipment after completing training.
Creating an account is free, and you can set one up any time, even before becoming a member. We typically email instructions to access the portal after each class.
Nope! Creating an account is free, and you can set one up any time, even before becoming a member. We typically email instructions to access the portal after each class.
You can always find the CCM Portal on our website, linked on the Main Menu under Resources.
You can only reserve equipment you've been trained or approved to use. Equipment you haven't completed training for will be locked. If you haven't completed safety training, signed the safety waiver, or if you're not currently an active member, you will not have access to equipment. After attending class or completing a tool test, your instructor will email you a link to complete a quiz. Passing the quiz immediately unlocks equipment access through your CCM Portal.
For the rest of your time at CCM, simply log in to your CCM portal, select the Reserve tab, and then select the equipment to reserve a time and date.
You can find all of our upcoming classes listed on the calendar of our Events & Classes page. Alternatively, click any of Popular Category buttons to browse by specific interests.
Tool tests are quick in-person skill checks for makers who have prior experience using specific tools or equipment. Instead of sitting through a full training class, you may schedule a one-on-one with an instructor to demonstrate safe and competent use of a machine.
Pass the test, take a short quiz, and your access is unlocked.
Training classes are hands‑on workshops led by staff that teaches you how to use a specific machine. Tool testing lets experienced makers skip the line demonstrate proficiency without taking a full class.
Both routes still require that you pass a short quiz before unlocking reservation access.
The ability to schedule tool tests is unlocked in your CCM Portal only after you've attended safety orientation and signed the safety waiver. Once unlocked, clicking "Schedule Tool Test" brings you to a form that immediately notifies shop captains after you submit a request.
Note: you may not schedule tool tests without completing these two steps. As a precaution, the button will not be visible to those who have not completed safety orientation or signed the safety waiver. Once unlocked, the tool test scheduling button will appear on your Home tab, shown in the screenshot below.

We don't ask you to take quizzes just to be mean, or make you relive the high school trauma of the PSATs!
We use quizzes to automate our entire safety training and equipment reservation platform, which in turn allows us to provide 24/7 access to the makerspace. Unlike other makerspaces where you might need to check-in and have a human approve access before heading into the shop, you can come in and create during the hours that work best for you! Better still, it means that CCM staff can wear Snuggies after work without fear of having to come in at 3:00 AM to unlock table saw access for someone who forgot to make that tasteful cutting board wedding present until the weekend beforehand. Win-win.
Quizzes are emailed out immediately after class only to those who attended a training workshop or who successfully passed a tool test.
Many introductory training classes are free; others have a nominal fee ranging from $60 to $100 depending on the cost of materials for the class.
Members receive a 20 % discount on special events and workshops. Discount codes for classes can be found on the Home tab of the CCM portal for all active members. The discount code will be hidden for inactive members.
Anyone! You don't have to be a member to attend classes. If you're curious about 3D printing but planning on moving to Bali tomorrow, you're still welcome to attend and learn a thing or two before you leave.
Note that only members can reserve and use equipment without an instructor present, however. That means that for all those not moving to an island paradise, you can take any classes you want but you'll need to be an active member before you can use it again after class on your own.
Yes! Non-members are welcome to sign up for any of the public classes and events at CCM, many of which are free to attend.
Please note that non-members may only access the makerspace while accompanied by a staff member, instructor, or current member, and may not use equipment outside of class.
Equipment & Facilities
Maybe! We've got a lot of equipment. You can always drop by during our staffed hours to take a look. Even easier still, just browse our equipment online.
CCM’s current inventory includes a huge range of categories including
- 3D printers, laser cutters, electronics equipment, sewing machines, sergers, embroidery machines, button makers, vinyl cutters, leatherworking, and stained glass in the Fab Lab.
- Hand and power tools, table saws, bandsaws, sanders, planers, jointers, routers, drill presses, and CNC routers in the woodshop.
- Hand and power tools, manual mills, manual lathes, Bridgeport CNC mills, MIG, TIG, OAW, plasma torches, and CNC plasma cutters in the metal shop -- to name a few!
Browse our equipment database to filter by shop, category, brand, or materials used. Alternatively, drop by during staffed hours if you've got specific questions.
Our 7,500‑square‑foot building includes three main shops—the Fab Lab, woodshop and metal shop—plus classrooms, meeting rooms, storage areas, a kitchen and a lounge.
Check out our Facilities page to read more.
No. Only members may use tools unsupervised. Can non‑members attend classes? Absolutely! The difference here is that during class, students are accompanied by an instructor who can oversee the class and make sure that tools are being used safely.
Policies like this one exist to ensure that equipment is used safely, responsibly, and only by those that have gone through the proper safety orientation and equipment-specific trainings. It's our primary goal to keep our community (including you) safe.
Some materials, like scrap wood and metal, are provided for free.
If you use CCM-supplied materials that might be harder to source (such as 3D printing filament, acrylic, vinyl, inert gases for the welders), we charge at-cost for these materials when you reserve equipment.
You are welcome to bring your own materials, but must make sure to vet them with us first to ensure they're safe to use and won't damage equipment. If you bring your own materials, there is no charge for using equipment.
You can read more about our materials policies in the CCM Handbook's Materials and Consumables section (pg. 25).
No. Membership covers access to shops and equipment. CCM materials are billed separately at-cost, which is usually about the same as buying the material yourself. We price it this way to recoup costs so we can keep restocking supplies for everyone.
Some scrappy materials, such as scrap wood or metal, are provided for free.
Yes! You can bring consumables (wood, metal, fabric, etc.) that meet CCM’s material guidelines. Some materials like 3D printing filament or spare woodshop fasteners, batteries, dominos, etc. are sold onsite at-cost.
You're welcome to bring your own materials, just make sure to vet them with us first.
If you bring your own materials, there is no charge to using equipment.
Yes. We'll supply all tools that you would need for most projects, but you're always welcome to bring your own tools. Just make sure to take your tools home or store them properly if you don't want others using them.
Likewise, please only bring in tools from reputable vendors. Uncle Billy's Backwoods Taxidermy & Drill Bit Emporium might not cut it.
Yes! CCM provides all necessary PPE, but you're also welcome to bring in your own, including N95 masks, eyewear, respirators, and hearing protection. Please make sure that PPE you're using has been purchased from reputable vendors. Likewise, you should always come prepared and wear closed‑toe shoes and appropriate attire to the makerspace.
We're very grateful that folks think of us when they want to donate equipment or materials, but we can't always accommodate every generous offer! As a result, we require that anyone interested in donating equipment or materials do so using our equipment donation form.
If we find anything left in the makerspace that's been dropped off or left without approval, we will ask that you return to pick it up immediately. If we have to pay to have donations discarded through hazardous waste or electronic waste disposal programs, we may have to charge the responsible member for both our time and the cost of the disposal. In extreme cases of repeated unwanted donations, we may revoke access to the makerspace.
You can read more about our donation policy in the CCM handbook.
Membership includes free weekly storage space in dedicated areas throughout the space, as well as the option for paid monthly storage space or lockers.
We don't allow projects to be stored outdoors anywhere on the property. Likewise, we don't permit large projects to be stored outside of dedicated storage areas without written approval from staff and shop captains. If we find anything stored in the makerspace outside of approved areas, we will ask that you return to pick it up immediately. If we can't contact you, we will discard or recycle the project.
CCM has 26 parking spaces (including two handicap spaces), additional parking in the adjacent pool lot south of our building, as well as bike racks at our north entrance.
You can read more and view satellite images of our parking lot on our Hours & Location page.
Classes & Events
Yes! Almost all of our classes and workshops are open to the public, and many are free or low‑cost. Members receive a 20% discount on all paid classes and special events.
Note that some classes, especially those in the woodshop and metal shop, may have an age limit or prerequisites to attend. Please plan accordingly and read the event description and our cancellation policy carefully!
CCM regularly offers intro-level classes across most equipment in all three of our shops. We also frequently offer advanced and specialty classes, including project-based activities and special events. We're always adding new instructors and classes to meet interest and demand.
Browse our Events & Classes calendar to see what's coming up this week!
Browse our Events & Classes calendar to see what's coming up, and to reserve a spot. Classes fill quickly, so sign up early.
Please note: you must also have a signed safety waiver on file before participating in any class.
Yes. If you have no experience using a piece of equipment, you must complete general safety orientation and also attend a training class for that specific equipment before using it. If you come in with prior experience using a tool, you can schedule a tool test after safety orientation to skip the class.
Yes! Most of our workshops are designed for first‑time makers in mind, and will guide you step‑by‑step to learn to use the equipment or tools.
Experienced makers have the option to skip entry‑level classes by scheduling tool tests.
- Full refunds are available up to one week before class
- Transfers are allowed up to 48 hours before class
- Unfortunately we do not allow refunds or transfers within 48 hours of class start
You can read more about our cancellation policy in the CCM Handbook.
Policies & Safety
The CCM member handbook contains the full code of conduct, safety rules, equipment policies and community expectations.
You can always find the handbook linked on the Main Menu under Resources on our website: https://clearcreekmakerspace.com
Yes! We’re big fans of brain food, which means you can certainly bring food and drinks into the makerspace.
That said, please make sure you’re enjoying food and drinks only in designated areas, such as work tables, our kitchen, and the member lounge. Never consume food and drink at any bench or table housing equipment, tools, computers, or machinery. Crumbly granola bars and 3D printers don’t mesh well together.
Ages 14 to 17:
Minors ages 14 to 17 are welcome to use equipment in CCM with a couple specific guidelines in place:
- A parent or legal guardian must sign a safety waiver on the minor's behalf
- A parent or legal guardian must have reviewed our policies and procedures
- Minors must always be closely accompanied by a parent or legal guardian
- All parties must have attended safety orientation.
Even so, there are still some things off limits to minors. Certain high-risk tools marked with red hazard-level safety cards are fully off limits to those under 18, including youth members ages 14-17. These machines must be operated by the supervising adult, and include:
- CNC routers
- CNC metal mills
- CNC plasma cutters
- Jointers
- Oxy-acetylene torch
- Planers
- Routers
- Table saws
- Horizontal bandsaws
- Welders
Under 14:
Those under 14 are certainly allowed in the space with a few caveats. We host regular special programs and events aimed at younger audiences, and encourage those groups to make use of the safer areas of CCM, including our clean assembly Fab Lab, teaching area, lounge, kitchen, and conference room areas.
Youth under 14 are firmly not allowed in active work areas such as the woodshop or metal shop unless they are participating in a program, class, and under direct supervision by a CCM staff member or a partnering organization’s staff.
While we adore animals and believe them all to be 13/10 Very Good Boys and Girls, we maintain a pet-free policy to ensure minimal distractions and to ensure that we prioritize a safe and focused environment for all of our makers.
The only exception to this rule is service animals, which are integral to their owners' needs. Service animals are welcome in the makerspace, and are expected to behave in a manner that maintains the calm and focused atmosphere of our space, without causing disruptions to other members.
Members can bring in any number of guests that they'd like! Encouraging collaboration and sharing exciting ideas is a major part of our community-first approach.
That said, all guests must sign a safety waiver and are never permitted to operate equipment or handle materials.
For advanced users, yes.
Certain shops, such as the woodshop and metal shop, require an after-hours buddy system for beginner and intermediate users wishing to use more dangerous equipment. Your buddy can be anyone: another member, a guest, a visitor over the age of 14, a basketball-playing dog. Note that non-members may never help you operate equipment or handle materials, however.
Advanced users may be exempt from buddy system policies provided they both receive written approval from a shop captain or CCM management and provided they have successfully completed or tested out of the majority of shop tools they wish to use.
When using tools in the woodshop and metal shop, beginner and intermediate makers are not allowed to work alone, especially after hours. Two people must be present within sight and hearing of these machines after-hours, or staff must be present in the space during our regular hours.
Those with advanced experience can test out of needing to adhere to the buddy system, provided they get a written exception from a shop captain or member of CCM management.
CCM Portal Troubleshooting
The CCM Portal is your one-stop-shop for access to everything in the makerspace. It's our learning and equipment reservation platform, and also the spot where you can manage your membership, find key resources, get help, browse our monthly news updates, and where you reserve equipment after completing training.
Creating an account is free, and you can set one up any time, even before becoming a member.
We're not! The opposite, in fact. We're consolidating all your progress and retiring the CreateEd program so you no longer have to manage two two active accounts. Just a single one that manages everything!
If you've ever been a member, you actually do! Just log in with the same email you used during membership sign up and you're off to the races.
If you're not already a member or if you've forgotten your credentials, you can select “Having trouble logging in?” to find that information. If you are brand new, use “Create an account” to set up your CCM portal.
We email links to set up your account when you first enroll at CCM. If you can't find that link, you can also always find the CCM Portal on our website's Main Menu under the Resources dropdown.
If you need to set up an account, select “Create an account” on the login page to set up your free CCM portal. If you've forgotten your credentials but suspect you may have already set up an account, you can select “Having trouble logging in?” to find that information.
If you can't remember your username or email, select “Having trouble logging in?” on the CCM portal login page to find that information.
If you can't remember your password, select “Having trouble logging in?” on the CCM portal login page to find that information.
We've migrated over all progress and grades from the CreateEd program, but notably the only classes that ever had published quizzes in the CreateEd portal were SAF101 (safety orientation), FDM101 (Prusa 3D printing), LAS110 (OMTech laser cutters), and WOOD120 (introductory woodshop tools). There were no other quizzes or equipment accessible directly through the CreateEd platform.
Instead, since there was no published quiz ready, your instructor would have likely emailed you a direct link to bypass any restrictions and reserve equipment. At the same time, your instructor should have also communicated to you that the direct link was a temporary solution, and that once a quiz was live we would require previous attendees to complete the quiz in order to reserve that equipment moving forward. Now that quizzes are live, it's time for you to take them!
That also means that we've retired any direct reservation link access. To resume using equipment, please complete the appropriate quiz for the equipment you've been trained to use. You should have received an email with instructions to do so if we have record of you attending the class or passing a tool test with us any time in the past.
In some rare cases, you may find that you don't have access to reserve equipment because the system detected that you have not yet signed the safety waiver or completed safety orientation. Please ensure both are complete to restore access.
If you believe any of these issues to be incorrect, please contact us and we can help troubleshoot
We've migrated over all progress and grades from the CreateEd program, but notably the only classes that ever had published quizzes in the CreateEd portal were SAF101 (safety orientation), FDM101 (Prusa 3D printing), LAS110 (OMTech laser cutters), and WOOD120 (introductory woodshop tools). There were no other quizzes or equipment accessible directly through the CreateEd platform.
Instead, since there was no published quiz ready, your instructor would have likely emailed you a direct link to bypass any restrictions and reserve equipment. At the same time, your instructor should have also communicated to you that the direct link was a temporary solution, and that once a quiz was live we would require previous attendees to complete the quiz in order to reserve that equipment moving forward. Now that quizzes are live, it's time for you to take them!
That also means that we've retired any direct reservation link access. To resume using equipment, please complete the appropriate quiz for the equipment you've been trained to use. You should have received an email with instructions to do so if we have record of you attending the class or passing a tool test with us any time in the past.
In some rare cases, you may find that you don't have access to reserve equipment because the system detected that you have not yet signed the safety waiver or completed safety orientation. Please ensure both are complete to restore access.
If you believe any of these issues to be incorrect, please contact us and we can help troubleshoot.
We retired the CreateEd program and folded all training and equipment reservation into the same CCM portal that members use to manage their membership. We did this for a few reasons:
- Based on member feedback, we wanted to reduce the number of logins required to access equipment at CCM. Before, members used their CCM account to manage membership, and used the CreateEd program to track progress, take quizzes, and reserve equipment. Now everything is done in the CCM portal itself. One login, one single platform.
- The CreateEd program proved to be too buggy, and consistently removed individual member progress after Canvas LMS (the host learning management system) pushed minor updates to the platform.
- The CreateEd program was not responsive, and we needed something that worked on all screen sizes, all smart devices, and for all preferred learning styles.
Enrollment codes are no longer required! Previously you needed an enrollment code simply to set up an account in the CreateEd platform.
Now, immediately after attending a class or completing a tool test, you'll receive a direct link to take a quiz via email. Open the quiz and enter your account ID, which can be found at the top of your CCM portal. Your account ID helps us link your progress directly to your individual account, which means tools are unlocked immediately after passing a quiz.
Quiz passcodes are no longer required! Now quizzes come straight to your inbox after you attend a class or pass a tool test. If you didn’t get a link, contact us.
Simply open the quiz and enter your account ID, which can be found at the top of your CCM portal. Your account ID helps us link your progress directly to your individual account, which means tools are unlocked immediately after passing a quiz.